Skip to content

How to Install Integrated Solar Led Street Light?

The components of integrated solar led street light are solar panel, controller, battery and light source. The integrated solar led street light can be mounted on a pole or wall, depending on the area to be covered. What do you need to pay attention to to get the proper and complete benefits from your installed equipment?


1. Preparation for installing integrated solar led street light


Choosing the correct location is the first step in installation. It is recommended that you choose a location with direct sunlight throughout the day, keep the battery fully charged, and provide good brightness and backup after sunset. The ground chosen should be a flat or slightly sloping surface. Usually, solar street lights are installed by professionals; however, since the steps to follow are simple and unchallenging, they can be done with the help of one or two people using a basic wrench and screwdriver. It is important to read the manufacturer's instructions for installation and become familiar with the components of the integrated solar led street light unit. The kit should contain all the parts needed for a successful installation.


2. Connect integrated solar led street light lamps and panels


All components of the integrated solar led street light must be attached to the pole before the pole is erected. Extra care should be taken when handling solar panels as they are the main unit of any solar lighting system. Understand how solar panels, batteries and other units relate to each other and connect wires accordingly. Solar panels and lighting should be mounted on the arm. When you're done, lift your arm slightly off the ground and secure it to the bar for easy access.


The LED luminaire should be carefully removed from the kit and placed on the floor facing upwards. Secure the lamp holder to the arm. The solar panel is also attached to the arm, once the solar panel and light fixture are properly attached to the arm, attach the arm to the pole and secure with the bolts provided in the kit. Now, make sure to connect everything according to the instructions given. Wire connections must be checked before the boom is lifted. Make sure the solar panels are angled to receive the most sunlight. The average installation height is 4 to 5 meters, with a preferred pole diameter of 2.5 inches. If you want to buy integrated solar led street light online, Anern solar online store would be a great choice since it is a qualified store.


3. Final inspection of integrated solar led street light and boom


It's a good idea to charge the integrated solar led street light beforehand so you can see soon after installation that everything is connected correctly and the light is working. Remember again that the orientation of the solar panels can be adjusted according to the direction of the sun and you can straighten the pole with the help of a crane or minimal manpower depending on the weight of the pole. The light pole should be carefully placed into the prepared hole in the ground and fastened with concrete, which will serve as the foundation for the integrated solar led street light. If multiple integrated solar led street lights are installed to cover a larger area, make sure the distance between the light poles is kept even, the recommended installation distance is 10 to 15 meters.

Previous article High Intelligence Level of Smart Solar Street Light with Automatic and Flexible Lighting Control

Leave a comment

Comments must be approved before appearing

* Required fields