Skip to content

Why Use Solar Energy Storage Systems?

Ⅰ. Why use solar energy storage system?


With the progress of society and the rapid development of science and technology, people's demand for energy has gradually increased, especially electric energy. When it comes to electricity, the most important part is generation and transmission. Although the construction of power transmission and distribution facilities has been accelerating in recent years, some remote island areas and sparsely populated mountainous areas cannot fully cover the power supply due to the high cost of grid deployment. In order to solve the problem of electricity consumption, diesel generators are generally used for power supply.


Diesel engine power generation not only needs to consider the cost of fuel itself, but also the storage, transportation of fuel and the noise and safety aspects of the system are unavoidable problems. However, the solar energy storage system has obvious application advantages in the above scenarios. The solar energy storage system does not have a series of problems caused by fuel supply and operating noise of the oil engine, and the cost of the solar energy storage system is also highly competitive, and the solar energy storage system is also green and environmentally friendly.


Ⅱ. The use of solar power system precautions


1) Avoid blocking. If the photovoltaic solar cells of the solar power system cannot be directly illuminated by sunlight, and only scattered light or a local area is used for power generation, the power generation at this time is about 10% to 20% less than that of solar power without shadows. Therefore, it is necessary to avoid blocking between the panels, including surrounding buildings such as utility poles, trees, and corners of house eaves.


2) Controller. The photovoltaic controller is an automatic control device used in the solar power system to control the multi-channel solar cell array to charge the battery and the battery to supply power to the solar inverter load. It is necessary to choose a controller with low loss, good working stability and long life. When installing the solar power system, it is necessary to know whether the controller belongs to a common negative design or a common positive design, which is helpful for the connection and installation of the entire system. When debugging the controller after installation, you must pay attention to the details. It is best to find professional personnel for installation and debugging, so as not to affect the service cycle of the entire solar power system project. Want to buy photovoltaic controller? Anern solar supply store would be a great choice.


3) The installation site of each solar power system project has different requirements for the products used in the system. When designing, designers generally fully consider the geographical environment and the needs of users to select products, and then carry out reasonable designs. Non-professionals must not follow other models to rigor, so as to avoid unnecessary losses caused by improper installation. Choose a formal design and installation company for installation, and your use and income can be better guaranteed.

Previous article High Intelligence Level of Smart Solar Street Light with Automatic and Flexible Lighting Control

Leave a comment

Comments must be approved before appearing

* Required fields