How to Install a Solar Energy Inverter for Maximum Power?

Nowadays, many families consider installing solar electric inverters, because after installing a solar electric inverter, not only can they use environmentally friendly electric energy, but they can also sell the excess electricity for profit. Therefore, we must pay attention to the installation of inverters, as it relates to the amount of power generation.

Carefully read the installation instructions before installing a solar energy inverter

Prior to installing a solar electric inverter, it is important to carefully read the installation instructions. During installation, specific attention should be paid to the tilt angle and azimuth angle of the inverter components, as there is no fixed value as a reference because each family's inverter component installation location is different. However, the principle is to ensure that the component and the light are perpendicular. If the light is at an angle to the inverter, the power will definitely be discounted.

Consider the irradiation situation when installing a solar energy inverter

When installing a solar electric inverter like a 50kw solar inverter, it is essential to consider the irradiation situation. In general, flat roofs have better irradiation conditions, but for buildings, the irradiation must be taken into account to ensure that more sunshine is shining on the components and not blocked by walls or any other objects. In places with good air quality and high atmospheric transparency, the inverter naturally receives the most light, and the power generation efficiency is also the highest.

Consider heat dissipation when installing a solar energy inverter

When installing a solar electric inverter, it is necessary to also consider the heat dissipation performance. On the one hand, a ventilated area should be chosen to enhance heat dissipation performance. On the other hand, the thinner the air, the worse the heat dissipation, such as in the Qinghai-Tibet Plateau area where thin air affects heat dissipation, and poor heat dissipation performance can lead to slower inverter operation and lower power generation.

Many solar electric inverters can set power, and many people set the total power to the highest to ensure maximum solar inverter efficiency. However, over time, the power of the inverter will decline, so if the inverter is used for a long time, the photovoltaic power should be set to between 40% and 60% - this will ensure the longest inverter service life and high power generation efficiency.

The above points are the things that should be emphasized in the installation and commissioning of solar electric inverters. Although the quality of the inverter itself will affect its use, we must also pay attention to the installation and commissioning of the inverter. Only by considering the installation settings and environment can the solar inverter efficiency be used to its full potential.