Project Overview
Location: Ukraine | Date: 2024
Capacity: 5 sets of 10.2KW off-grid systems | Application: Residential & small commercial
Anern supplied five 10.2KW off-grid solar power systems to Ukraine. These provide backup and primary power for residential properties and small commercial facilities facing grid instability.
Each system delivers 10.2KW of inverter capacity paired with lithium battery storage. The configuration is sized to support critical loads during extended grid outages.
Grid Reliability and Equipment Lead Time Pressures
The Ukrainian contractor needed to deliver robust energy independence solutions against a backdrop of frequent grid interruptions. Sourcing high-power off-grid equipment with short lead times was essential—homeowners demanded immediate installation, not months of waiting.
The contractor also required equipment that local electricians could install without specialized training. Pre-configured, all-in-one system layouts became a non-negotiable requirement for the project's feasibility.
The Anern Solution: Engineered for Installers
Anern provided five 10.2KW off-grid hybrid solar power system units. Each was pre-assembled with high-capacity 51.2V 300Ah floor-standing battery storage for extended runtime during blackouts.
The 15kWh lithium battery configuration allowed each site to run essential loads through multiple-day outages without generator backup. This provided true energy independence for Ukrainian homeowners.
The off-grid hybrid solar systems collection's integrated design meant installers could complete each system in a single day—mount panels, connect pre-terminated battery cables, and commission the inverter through a guided setup wizard.
10.2KW System Architecture
Each installation combined a high-voltage hybrid inverter with a 10kWh wall-mounted solar battery for daily cycling. A floor-standing LiFePO4 battery provided backup reserve for extended grid failures.
The residential solar power systems' design principles guaranteed the system could expand later as energy needs grew. This modular approach gave the contractor a repeatable 10.2KW template deployable at any site with minimal customization.
Key B2B Benefits & Project Impact
- Expedited deployment under time pressure: Pre-configured system design enabled five complete installations within two weeks, meeting urgent homeowner demand for grid-independent power.
- Single-day installation per site: Factory-integrated components reduced on-site wiring to panel connections and battery interconnects, slashing labor costs for the contractor.
- Multi-day backup autonomy: The 10.2KW system with 15kWh+ storage capacity kept critical circuits operational through extended grid outages, a decisive selling point for Ukrainian homeowners.
- Scalable future expansion: Anern's modular architecture allowed the contractor to offer phased battery upgrades, increasing customer lifetime value while spreading upfront costs for end users.
